|
Rounded Plates
A rounded plate is a 1 x n Lego plate modified with hollow studs
and rounded ends. The initial plates, released in 1981, had holes that would fit a
connector at the ends and in some cases a cross hole in the center.
The early rounded plates also had teeth on the ends and were part of the toothed
system of elements. As that system was phased out many of these elements were replaced
by similar, non-toothed versions. | |||||
 |
|||||
| 4263 | Rounded plate w/ toothing, 1 x 4 Technic Plate 1 x 4 with Holes LD, PR 1981-present |
||||
 |
|||||
| 2711 | Rounded plate w/ toothing, 1 x 5 Technic Rotor 2 Blade with 2 Studs LD, PR 1986-1998. Replaced by 32124. US patent D290,721. |
||||
 |
|||||
| 32124 | Rounded plate, 1 x 5 (no toothing) Technic Rotor 2 Blade with 4 Studs LD, PR 1998-present. Replaces 2711. |
||||
 |
|||||
| 4262 | Rounded plate w/ toothing, 1 x 6 Technic Plate 1 x 6 with Holes LD, PR 1981-present |
||||
 |
|||||
| 4442 | Rounded plate w/ toothing, 1 x 8 Technic Plate 1 x 8 with Holes LD, PR 1982-present |
||||
 |
|||||
| 2719 | Rounded plate w/ toothing, 1 x 10 Technic Plate 1 x 10 with Holes LD, PR 1986-present |
||||
 |
|||||
| 2712 | Rotor, 3-pronged, 86 Technic Rotor 3 Blade LD, PR 1986-1998. Replaced by 32125. US patent D290,477 |
||||
 |
|||||
| 32125 | Rotor, 3-pronged, 98 Technic Rotor 3 Blade with 6 Studs LD, PR 1998-present. Replaces 2712. |
||||
| prev next |
|||||
 |
|
|
|
|
|
